Black Natural Versatile Plastic
AniFlex V2 Proffie Crystal
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$59.73
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Important Note:
This chassis is NOT compatible with the AniFlex Elite hilt. We offer a separate chassis for the Elite.
*******************
This chassis has been designed specifically for the AniFlex v2 lightsaber hilt which was released in March 2021. Once fitted, it is cosmetically identical to the earlier version. However unlike the previous chassis, this version does not require to blade holder to be drilled and tapped to fit a neopixel blade connector securing screw. This in turn means the chassis can be assembled away from the hilt with the exception of the switch wires, making subsequent removal for future maintenance significantly easier.
An optional front panel is also available and comes in two different versions which can be found here and here.
Full installation instructions can be found here.
IMPORTANT NOTE
This chassis requires that the 7 Chambers blade plug be shortened by about 3/8 of an inch. If you wish to have the plug illuminated, it is recommended that you use a Shtok or equivalent LED connector on the hilt side as it won't be possible to fit one in the blade plug once it has been shortened.
For those who have never used Proffieboards before, we offer a complete startup pack, including full instructions, config files and sound fonts customized for this saber. Click here for the instruction manual.
This chassis is NOT compatible with the AniFlex Elite hilt. We offer a separate chassis for the Elite.
*******************
This chassis has been designed specifically for the AniFlex v2 lightsaber hilt which was released in March 2021. Once fitted, it is cosmetically identical to the earlier version. However unlike the previous chassis, this version does not require to blade holder to be drilled and tapped to fit a neopixel blade connector securing screw. This in turn means the chassis can be assembled away from the hilt with the exception of the switch wires, making subsequent removal for future maintenance significantly easier.
An optional front panel is also available and comes in two different versions which can be found here and here.
Full installation instructions can be found here.
IMPORTANT NOTE
This chassis requires that the 7 Chambers blade plug be shortened by about 3/8 of an inch. If you wish to have the plug illuminated, it is recommended that you use a Shtok or equivalent LED connector on the hilt side as it won't be possible to fit one in the blade plug once it has been shortened.
- Fits Proffieboard 1.5/2.2 soundboard;
- 18650 pre-wired battery;
- 2.1mm recharge port;
- 28mm bass speaker;
- Kill key included.
For those who have never used Proffieboards before, we offer a complete startup pack, including full instructions, config files and sound fonts customized for this saber. Click here for the instruction manual.
Details
What's in the box:
AniFlex V2 Proffie Crystal
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$47.73
$46.21