HK MP5K GBBR V2 Umarex VFC PDW to K Barrel Sleeve
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$36.12
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Made to fit the Heckler & Koch Umarex VFC MP5K PDW GBBR V2 airsoft SMG made in Asia. This barrel sleeve allows you to transform your PDW into the K model. Fits the new VFC MP5 GBBR V2 system.
Fits airsoft SMG HK VFC MP5K PDW GBBR V2, part number VF2-LMP5KPDW-BK02
DIRECTIONS FOR INSTALLATION (uses simple tools):
Remove the 3-lug / 14mm- threaded barrel tip from the SMG. Remove your handguard grip. Remove the cocking tube cap cover by pushing onto the spring loaded retaining plunger. Using a flathead screwdriver, unscrew the retaining cap that is located behind the cocking cap cover. Gently tap the front sight assembly off of the receiver. Unscrew the sling mount off of the front sight assembly. Unscrew the original barrel sleeve off of airsoft barrel. Be mindful of the hop up adjustment wheel, spring and pin. At this point you can decide to trim the airsoft barrel down to 55mm so that it is short for the K model and is hidden down in the faux barrel. If you leave the barrel untrimmed, the airsoft barrel will simply extend beyond the new barrel sleeve. With the hop up adjustment wheel assembly in place, simply screw in the new K barrel sleeve and reattach the front sight assembly. Screw in the sling attachment as it will fit into the groove of the new barrel sleeve. Screw in the retaining cap behind the location of the cocking tube cap. Reinstall the cocking tube cap. Place your handguard grip back into place. You now have an MP5K barrel setup!
Fits airsoft SMG HK VFC MP5K PDW GBBR V2, part number VF2-LMP5KPDW-BK02
DIRECTIONS FOR INSTALLATION (uses simple tools):
Remove the 3-lug / 14mm- threaded barrel tip from the SMG. Remove your handguard grip. Remove the cocking tube cap cover by pushing onto the spring loaded retaining plunger. Using a flathead screwdriver, unscrew the retaining cap that is located behind the cocking cap cover. Gently tap the front sight assembly off of the receiver. Unscrew the sling mount off of the front sight assembly. Unscrew the original barrel sleeve off of airsoft barrel. Be mindful of the hop up adjustment wheel, spring and pin. At this point you can decide to trim the airsoft barrel down to 55mm so that it is short for the K model and is hidden down in the faux barrel. If you leave the barrel untrimmed, the airsoft barrel will simply extend beyond the new barrel sleeve. With the hop up adjustment wheel assembly in place, simply screw in the new K barrel sleeve and reattach the front sight assembly. Screw in the sling attachment as it will fit into the groove of the new barrel sleeve. Screw in the retaining cap behind the location of the cocking tube cap. Reinstall the cocking tube cap. Place your handguard grip back into place. You now have an MP5K barrel setup!
Details
What's in the box:
HK MP5K VFC V2 K Barrel Airsoft
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
