Gray PA12
89 sabers 2020 OWK3 Twist & Click Proffie P1
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$32.45
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Chassis for the 89 Sabers OWK3 hilts.
For this chassis you will also require the P2 of the design.
This is a removable battery design. The battery tabs required are the type shown in the link below:
https://www.ebay.co.uk/itm/20Pairs-18650-Battery-Negative-to-Positive-Conversion-Spring-Contact-16-5mmx16mm/362591431441?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
This chassis is designed for use with:
-Proffie
-KR Sabers 28mm Bass speaker
-18650 Lithium Ion Battery
-High Amp kill switch
-Shtok Battery and Speaker connector set
This design allows for the board to slide into place once wired up and tested.
The kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue to secure it.
If you struggle inserting the battery tabs, I suggest carefully warming the tabs with a clean soldering iron as inserting them. It will help for the plastic surrounding the tabs to grip them.
The fixed half on the chassis is designed to be self retained by the thumb screw of the hilt. To access the board, simply undo that screw and carefully lower the fixed chassis. Leave the switch wires long.
The twist and click chassis system is bespoke to Jimmy's Saber Junk and not to be replicated.
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
For this chassis you will also require the P2 of the design.
This is a removable battery design. The battery tabs required are the type shown in the link below:
https://www.ebay.co.uk/itm/20Pairs-18650-Battery-Negative-to-Positive-Conversion-Spring-Contact-16-5mmx16mm/362591431441?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
This chassis is designed for use with:
-Proffie
-KR Sabers 28mm Bass speaker
-18650 Lithium Ion Battery
-High Amp kill switch
-Shtok Battery and Speaker connector set
This design allows for the board to slide into place once wired up and tested.
The kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue to secure it.
If you struggle inserting the battery tabs, I suggest carefully warming the tabs with a clean soldering iron as inserting them. It will help for the plastic surrounding the tabs to grip them.
The fixed half on the chassis is designed to be self retained by the thumb screw of the hilt. To access the board, simply undo that screw and carefully lower the fixed chassis. Leave the switch wires long.
The twist and click chassis system is bespoke to Jimmy's Saber Junk and not to be replicated.
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
Details
What's in the box:
Jimmy_s Saber Junk 89 sabers 2020 OWK3 Mk2 Basic P
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
