PA12 as printed
Manned Orbiting Laboratory (MOL) Re-Entry Vehicle
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$14.91
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is my interpretation of the re-entry vehicle from the Hawk Manned Orbiting Laboratory kit in 1/72 scale.
Note that the hatch is printed inside the model, on a sprue. The PA12 print may have the hatch slightly stuck to the interior. The hatch on my sample seems to be slightly smaller than the design; if build with the hatch closed, hold it in place from the inside with poster putty or tape before glueing.
I have a version with solid windows and closed hatch as well:
https://www.shapeways.com/product/C89L6DFWJ/manned-orbiting-laboratory-mol-re-entry-vehicle2
A full build from the shapeways parts is at: https://www.frankhenriquez.com/scale/mol-re-entry-vehicle/
Note that the hatch is printed inside the model, on a sprue. The PA12 print may have the hatch slightly stuck to the interior. The hatch on my sample seems to be slightly smaller than the design; if build with the hatch closed, hold it in place from the inside with poster putty or tape before glueing.
I have a version with solid windows and closed hatch as well:
https://www.shapeways.com/product/C89L6DFWJ/manned-orbiting-laboratory-mol-re-entry-vehicle2
A full build from the shapeways parts is at: https://www.frankhenriquez.com/scale/mol-re-entry-vehicle/
Details
What's in the box:
LiftingBody
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
