Mooring Bitts 1/30th Elco 80' Qty 3
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$8.00
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This model is based on a detailed Elco drawing for all 80' boats. Quantity used per boat is 2, 3, or 5. A mounting pin drill guide is included.
Deck plates of 1/8" thickness were used under the bulkhead 4 forward bitt and the PT 731-760 refueling at sea bitts amidships at bulkhead 21. A template for these is available here: http://www.pt103.com/images/3D_parts/3DP_Elco_80_Mooring_Bitt_Deck_Plates.jpg.
Preparation
The first step is to clean all parts thoroughly. Handle very carefully as the plastic is brittle. Please see the guide and links here: http://www.pt103.com/3D_Printed_PT_Boat_Parts.html. For best painting results be sure to follow cleaning with a UV cure from a lamp with the correct output, or the sun.
Quantities and Locations, to center of bitts
Measurements are given in full scale and are taken from Elco drawings.
PT 103-108:
Quantity: 2. PT 103-108 used a towing bitt instead of a mooring bitt at bulkhead 4.
Locations, best guess from photos is at same position as PT 731-760 aftermost bitts:
2 centered on frame 69, 946 1/4" aft of forward point (about 19.9" forward of aftermost edge of boat), 6 3/4" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
PT 109-196, 314-367, 372-383, 486-545, 546-563:
Quantity: 3 or 5. PT 522-545 had refueling at sea bitts (drawing not available) like PT 731-760 so they used quantity 5.
Locations:
1 centered on bulkhead 4, 76 1/4" aft of forward point on boat center line. Horns to be at right angles to boat center line.
2 (PT 522-545 only), best guess from photos is centered on frame 26, 370 1/2" aft of forward point, about 9" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
2 centered on bulkhead 61, 853 1/4" aft of forward point, 50" outboard of boat center line port and starboard (slightly outboard of outboard face of coaming). Horns to be parallel to boat center line.
PT 565-624:
Quantity: 5.
Locations unknown (drawing not available), best guess from images:
1 centered on bulkhead 4, 76 1/4" aft of forward point on boat center line. Horns to be at right angles to boat center line.
2 centered on frame 26, 370 1/2" aft of forward point, about 9" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
2 centered on frame 69, 946 1/4" aft of forward point (about 19.9" forward of aftermost edge of boat), 6 3/4" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
PT 731-760:
Quantity: 5.
Locations:
1 centered on bulkhead 4, 76 1/4" aft of forward point on boat center line. Horns to be at right angles to boat center line.
2 centered on bulkhead 21, 310 1/4" aft of forward point, 6 1/2" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
2 centered on frame 69, 946 1/4" aft of forward point (about 19.9" forward of aftermost edge of boat), 6 3/4" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
Deck plates of 1/8" thickness were used under the bulkhead 4 forward bitt and the PT 731-760 refueling at sea bitts amidships at bulkhead 21. A template for these is available here: http://www.pt103.com/images/3D_parts/3DP_Elco_80_Mooring_Bitt_Deck_Plates.jpg.
Preparation
The first step is to clean all parts thoroughly. Handle very carefully as the plastic is brittle. Please see the guide and links here: http://www.pt103.com/3D_Printed_PT_Boat_Parts.html. For best painting results be sure to follow cleaning with a UV cure from a lamp with the correct output, or the sun.
Quantities and Locations, to center of bitts
Measurements are given in full scale and are taken from Elco drawings.
PT 103-108:
Quantity: 2. PT 103-108 used a towing bitt instead of a mooring bitt at bulkhead 4.
Locations, best guess from photos is at same position as PT 731-760 aftermost bitts:
2 centered on frame 69, 946 1/4" aft of forward point (about 19.9" forward of aftermost edge of boat), 6 3/4" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
PT 109-196, 314-367, 372-383, 486-545, 546-563:
Quantity: 3 or 5. PT 522-545 had refueling at sea bitts (drawing not available) like PT 731-760 so they used quantity 5.
Locations:
1 centered on bulkhead 4, 76 1/4" aft of forward point on boat center line. Horns to be at right angles to boat center line.
2 (PT 522-545 only), best guess from photos is centered on frame 26, 370 1/2" aft of forward point, about 9" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
2 centered on bulkhead 61, 853 1/4" aft of forward point, 50" outboard of boat center line port and starboard (slightly outboard of outboard face of coaming). Horns to be parallel to boat center line.
PT 565-624:
Quantity: 5.
Locations unknown (drawing not available), best guess from images:
1 centered on bulkhead 4, 76 1/4" aft of forward point on boat center line. Horns to be at right angles to boat center line.
2 centered on frame 26, 370 1/2" aft of forward point, about 9" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
2 centered on frame 69, 946 1/4" aft of forward point (about 19.9" forward of aftermost edge of boat), 6 3/4" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
PT 731-760:
Quantity: 5.
Locations:
1 centered on bulkhead 4, 76 1/4" aft of forward point on boat center line. Horns to be at right angles to boat center line.
2 centered on bulkhead 21, 310 1/4" aft of forward point, 6 1/2" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
2 centered on frame 69, 946 1/4" aft of forward point (about 19.9" forward of aftermost edge of boat), 6 3/4" inboard of guard (outermost edge of boat) port and starboard. Horns to be parallel to boat side.
Details
What's in the box:
Mooring Bitts 30th Elco 80
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
