^{Click and drag to rotate}

SCX24 Super Low CG Battery Tray + Shock Towers 3d printed

DIGITAL PREVIEW
Not a Photo

Black Natural Versatile Plastic

DIGITAL PREVIEW
Not a Photo

SCX24 Super Low CG Battery Tray + Shock Towers 3d printed Stock (Top) vs. Mod19RC (Bottom)

DIGITAL PREVIEW
Not a Photo

SCX24 Super Low CG Battery Tray + Shock Towers

Made by

Mod19RC

Print With Shapeways

Choose Your Material

$16.93

Basic Materials Best Value

Basic Nylon Plastic
Starting at $ 9.01

Shop Owner Recommendations

Versatile Plastic
Starting at $ 16.93

Choose your color and finish

Have a question about this product?

contact the designer

You must be logged in and verified to contact the designer.

Product Description

Here are two mods for the Axial SCX24 in one package! The first part is a super low CG battery tray that works with an aftermarket battery. It lowers the battery between the frame rails and the motor as much as possible without interfering with the driveshaft or rear suspension. It is designed to work with batteries such as the Beta FPV 2s 350mAh lipo. https://www.amazon.com/BETAFPV-Battery-Silicone-Beta75X-Brushless/dp/B07JG3ZFC5 Batteries sold separately, and you will have to either make an adapter or change the plug type to be compatable with the stock ESC/RX unit. (JST-PH 2.0)

The second part is a revised rear shock tower with four mounting holes. The stock position is retained, and the additional holes allow for variations in ride height and for using longer shocks such as the Losi Micro Crawler shocks for more articulation.

**IMPORTANT** You should use either a 1.1mm or a #57 (.043") drill bit to clean out the screw holes. There is always a small amount of unsintered powder left in deep holes despite the cleaning process.