You must be logged in and verified to contact the designer.
Product Description
Brand new Mk4 Basic chassis for the KR x OR KRORssguard hilts.This is a removable battery design. The battery tabs required are the type shown in the link below:
https://www.ebay.co.uk/itm/20Pairs-18650-Battery-Negative-to-Positive-Conversion-Spring-Contact-16-5mmx16mm/362591431441?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
This chassis is designed for use with:
-Proffie Board
-28mm Bass speaker
-18650 Lithium Ion Battery
-High amp kill switch
-Three M2.5x50mm threaded rods with nuts and washers
Thread the bars into the heatsink, and pass them through the "engine" and into the chassis. Secure the chassis with nuts and washers. It's fiddly but it's how the hilt was designed to retain the chassis, and once its fully secured, it won't budge.This non OLED option has the battery & board facing the front of the hilt.The killswitch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue to secure it.
If you struggle inserting the battery tabs, I suggest carefully warming the tabs with a clean soldering iron as inserting them. It will help for the plastic surrounding the tabs to grip them.
This design allows for the board to slide into place once wired up and tested. Recommended as the final step.
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: