Mold Master D6 - Sharp Edged, Odin

This is the regular gaming D6 for mold masters in font 'Odin'. This die is intended to be used as master for mold making. It can be used to create a silicone mold, which in turn can be used for resin dice making.

Because it is 3D printed, there is a slight printing texture on each side. I recommend lightly sanding the D6 with a paper of 800 grid or finer and polishing before making a mold. The dice shown in the images above were made using the following products, available on Amazon:
Mold Star 15 Slow Moldmaking Silicone Rubber
Art 'N Glow Clear Casting and Coating Epoxy Resin

The numbers are 0.6mm deep and have a slight radius on the faces. The die is roughly 15mm from flat to flat and 26mm from corner to corner. The die mathematically balanced in CAD software design to ensure that it is centered and fair.

For the other dice to complete this design set, take a look at the 'Mold Master' category in my shop. If something you are interested in is missing, please send me a note. I am working diligently to complete the missing designs and am more than willing to prioritize designs of interest.