Black Natural Versatile Plastic
AniFlex CFX Plain Chassis
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$46.21
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Important Note:
This chassis is NOT compatible with the AniFlex Elite hilt. We offer a separate chassis for the Elite.
************
It was originally designed for the AniFlex v1, and is compatible with the V2 hilt.
Although oiginally designed for the AniFlex v1, this chassis is fully compatible with the V2 hilt.
However please note the following differences:
*********
A great looking chassis for the AniFlex that is simple to install. It is fundamentally the same as our other AniFlex chassis, but without the crystal chamber.
This chassis is suitable for both neopixel installs and Tri-Cree (in-hilt LED) installs.
No other chassis items are needed to install this chassis. However, if wished, two versions of the front panel are compatible. They can be found here and here.
Full fitting instructions can be downloaded in pdf form from here.
Important Note:
This chassis requires that the 7 Chambers blade plug be shortened by about 3/8 of an inch. If you wish to have the plug illuminated, it is recommended that you use a Shtok or equivalent LED connector on the hilt side as it won't be possible to fit one in the blade plug once it has been shortened.
Fits CFX soundboard;
18650 pre-wired battery;
2.1mm recharge port;
28mm bass speaker;
Kill key included.
For those who have never used Proffieboards before, we offer a complete startup pack, including full instructions, config files and sound fonts customized for this saber. Click here for the instruction manual.
This chassis is NOT compatible with the AniFlex Elite hilt. We offer a separate chassis for the Elite.
************
It was originally designed for the AniFlex v1, and is compatible with the V2 hilt.
Although oiginally designed for the AniFlex v1, this chassis is fully compatible with the V2 hilt.
However please note the following differences:
- The V2 hilt does not require the thin white spacer to replace the heat sink. This is because the blade holder has been redesigned without a heat sink void.
- The v2 blade holder does not have the internal shoulder against which to secure the neopixel connector. As such, you will need to find some way of securing the neo connector in the blade holder. Hot glue will work, but drilling and tapping a hole for a small grub screw is preferable. For those without the facilities to cut threads, please see our model-specifici AniFlex V2 chassis.
*********
A great looking chassis for the AniFlex that is simple to install. It is fundamentally the same as our other AniFlex chassis, but without the crystal chamber.
This chassis is suitable for both neopixel installs and Tri-Cree (in-hilt LED) installs.
No other chassis items are needed to install this chassis. However, if wished, two versions of the front panel are compatible. They can be found here and here.
Full fitting instructions can be downloaded in pdf form from here.
Important Note:
This chassis requires that the 7 Chambers blade plug be shortened by about 3/8 of an inch. If you wish to have the plug illuminated, it is recommended that you use a Shtok or equivalent LED connector on the hilt side as it won't be possible to fit one in the blade plug once it has been shortened.
Fits CFX soundboard;
18650 pre-wired battery;
2.1mm recharge port;
28mm bass speaker;
Kill key included.
For those who have never used Proffieboards before, we offer a complete startup pack, including full instructions, config files and sound fonts customized for this saber. Click here for the instruction manual.
Details
What's in the box:
AniFlex CFX Plain Pt1
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$40.47
$58.31
$59.32
$59.73
