Polished Bronzed-Silver Steel
Shooter Rod Knob - Mando1
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$80.53
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Here is a shooter knob for the new Stern Pinball Mandalorian Pinball Baskar Stamped.
Blank shooter rods can be purchased from PinballLife and then you mix up a 2 part epoxy glue and use sparingly to fasten the 2 parts together. Have a rag with thinners or white spirits at hand to remove spill over before it dries. There is a small hole on the backside as this releases trapped air to reduce the effect of the knob wanting to pop back off the rod due to air pressure when joining the 2 parts. When gluing set to the desired shooter length - tip of rod to back edge of shooter knob.
For the Metal options you could add some paint to the engraved / stamped section.
Pick you desired material and enjoy.
Blank shooter rods can be purchased from PinballLife and then you mix up a 2 part epoxy glue and use sparingly to fasten the 2 parts together. Have a rag with thinners or white spirits at hand to remove spill over before it dries. There is a small hole on the backside as this releases trapped air to reduce the effect of the knob wanting to pop back off the rod due to air pressure when joining the 2 parts. When gluing set to the desired shooter length - tip of rod to back edge of shooter knob.
For the Metal options you could add some paint to the engraved / stamped section.
Pick you desired material and enjoy.
Details
What's in the box:
Shooter Rod Knob - Mando1
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
