Accurate Sized/Shape/Detail Belt Buckles for your 1/6th SUPER HERO X-Mutant Wolv figure.
Parts will come unpainted, and need a light clean up before painting. You can choose to make a little hole on the top of the hand to place the peg into, OR cut the peg off and glue directly flush to hand.
Set Includes 6 Claws, & 6 Rear Claw Covers ONLY nothing else is included. Belt Material Not Included!
Any questions please feel free to ask.
****RECOMMENDED PAINTING TIPS****
- Lightly sand with 600 Grit Sand Paper and finish with 1000 Grit
- Place parts in a cup of Warm to Hot Water(NOT BOILING) with 4-5 drops of mild dish washing detergent. Swoosh around slowly for about 30-45sec to mix detergent and water. Allow parts to sit in cup of water for a few hours to help clean off sanding dust and excess printing materail and any oilly like substance that was applied during the print process.
- Take parts out and Rinse parts with clean warm water to remove soap and allow to dry on paper towel.
- When Dry, I like to use a light primer like Tamiya or Mr. Surfacer 1000 and apply just a few light coats.
- Now that your primer has dried for a few hours use your paint of choice, and follow that up with your choice of finishing clear coat.
******************************************************
You do not have to follow these steps, but this is what I do to get the part to look the best.