Wahoo Elemnt Roam Easton ICM Mount

Features:

• Wahoo Elemnt Roam mount for Easton's ICM stem mount system.​
• Compatible with both the Roam V1 and Roam V2.
• Strong, durable mount that holds your Wahoo device directly in front of your Easton stem.

Please note: The special Easton retained nut that sits inside the stem faceplate is required and not supplied with this 3D printed mount. 1x M5x16mm cap screw is also required and easy to source from your local hardware store.

Overview
Mount your Wahoo Elemnt Roam in front of your handlebars with Easton's ICM stem mount system. The Easton stem faceplate is compatible with a special Easton retained nut that provides a secure point to attach the mount.

The MagCAD Easton ICM Wahoo Elemnt Roam Mount is designed specifically for the shape of the Roam. It is extremely strong and stiff, keeping your device securely positioned in front of your stem.

​Application
Fitting the MagCAD Easton mount is a simple process. Should you require any further clarification to the below please get in contact.

1. Remove the faceplate from your stem.
2. Insert the Easton retained nut (not supplied) into the back of the faceplate.
3. Bolt the mount through the faceplate, using 1x M5x16mm cap screw, into the retained nut and loosely tighten. 
4. Do not use the bolt from the original Easton Garmin mount as it will not fit.
5. Pivot the mount to the centre of the slot and fully tighten.
6. Check the mounting bolt is long enough to fully engage with the retained nut but not too long to protrude past the tee nut and foul your handlebars.
7. Reassemble the faceplate to your stem following the stem manufacturers instructions.
8. Loosen the mount and pivot to your preferred orientation before retightening.

The below hardware is required and not supplied with the 3D printed mount from Shapeways:

• 1x M5 Easton retained nut - Usually supplied with your Easton ICM compatible stem or Easton Garmin Mount. Please get in contact if you are struggling to source this item.
• 1x M5x16mm cap screw.

About Me
I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others.

Feel free to get in contact with any questions or feedback. Individual customisation will be considered.

​Model Revisions
Revision 2 (current) - Mount style updated, stiffness increased.
Revision 1 - Production Issue.