White Natural Versatile Plastic
Socket_box
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$60.16
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
A bracket for embedding an external power socket in a car.
In addition to this product, a lid that is exhibited at the same time is required.
You also need a Φ3mm shaft. Please purchase at a home center, etc.
The shaft hole may be tight at the time of purchase, so use a Φ3.2 drill to open it.
Spray painting on the shaft makes the sliding parts heavier and allows the lid to be fixed in any position.
There is no stopper mechanism, but if it opens flutteringly,
Attach the magnet sticker to the stepped part under the bracket and the lid.
Since there is a gap of about 1.2 mm, a thin magnet seal is recommended.
The power socket is based on the Nanaboshi NAW202AD (F) M10,
Please check the dimensional drawing.
In addition to this product, a lid that is exhibited at the same time is required.
You also need a Φ3mm shaft. Please purchase at a home center, etc.
The shaft hole may be tight at the time of purchase, so use a Φ3.2 drill to open it.
Spray painting on the shaft makes the sliding parts heavier and allows the lid to be fixed in any position.
There is no stopper mechanism, but if it opens flutteringly,
Attach the magnet sticker to the stepped part under the bracket and the lid.
Since there is a gap of about 1.2 mm, a thin magnet seal is recommended.
The power socket is based on the Nanaboshi NAW202AD (F) M10,
Please check the dimensional drawing.
Details
What's in the box:
socket_box
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
