Hammerhead Karoo 2 K-Edge Insert

Features:

• MagCAD Hammerhead Karoo 2 insert for compatible K-Edge mounts.
• Replaces the insert on most K-Edge mounts, allowing you to mount a Hammerhead Karoo 2 computer.
• Weighs just 8 grams without hardware.

Overview
This MagCAD insert replaces the insert on compatible K-Edge mounts, allowing you to mount a Hammerhead Karoo 2 cycle computer.

The insert is pictured and tested with the K-Edge Race Mount. It will fit a number of other K-Edge mounts but not all. Therefore dimensions have been provided to confirm the fit before place your order. If in doubt get in contact.

Requires 2x M3x0.5mm thread holes at 20mm spacing and a max inserted depth of 4.5mm. See attached photo for more dimensions.

Application
Fitting the MagCAD insert is a simple process. Simply remove the insert from your K-Edge mount with a 2mm Allen key and install the MagCAD insert with 2x M3x12mm countersunk screws, not supplied.

Although four holes are present in the MagCAD insert, only two are needed to correctly secure it. Choose either the front/rear holes or the left/right holes depending on any additional mounts you have attached underneath your K-Edge mount.

To attach your Hammerhead device simply follow the same procedure as with the OEM Hammerhead mount, pulling the device backward onto the mount with a slight twist to centre and locate it. You should here a positive click when the device is attached. We recommend using the tether that's supplied with your Hammerhead device just for extra security.

The below hardware is required and very simple to source locally:

• 2x M3x12mm  countersunk screws.

About Me
I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others.

Feel free to get in contact with any questions or feedback. Individual customisation will be considered.

Model Revisions
Revision 1 - Prototype Issue, awaiting final fit/function and testing on other mounts.

Disclaimer
This product and/or service is not affiliated with, endorsed by or in any way associated with Hammerhead Navigation, Inc or K-Edge. Their respective logos are their own trademarks.