Click and drag to rotate
04: Threading Core for Cannula-Wire-Loop 3d printed

DIGITAL PREVIEW
Not a Photo

Gray PA12
04:  Threading Core for Cannula-Wire-Loop 3d printed
04:  Threading Core for Cannula-Wire-Loop 3d printed

DIGITAL PREVIEW
Not a Photo

04:  Threading Core for Cannula-Wire-Loop 3d printed
04:  Threading Core for Cannula-Wire-Loop 3d printed

DIGITAL PREVIEW
Not a Photo

04:  Threading Core for Cannula-Wire-Loop 3d printed
04:  Threading Core for Cannula-Wire-Loop 3d printed

DIGITAL PREVIEW
Not a Photo

04:  Threading Core for Cannula-Wire-Loop 3d printed
04:  Threading Core for Cannula-Wire-Loop 3d printed

DIGITAL PREVIEW
Not a Photo

04: Threading Core for Cannula-Wire-Loop

$84.99
Ships as soon as 4 days
3D printed in nylon 12 material with a matte finish and slightly grainy feel.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
!  !  !   When you order this threading core, please leave a message for me with your address and order number   !  !  !
As soon as the order is dispatched by Shapeways, you will receive an accessory from me: a manually reworked threading notch. You pay for this part when you order from Shapeways. - One of the pictures below shows you the threading notch included with your order on the left, an unprocessed threading notch in the middle and a smooth-surfaced threading notch finished with light-curing composite on the right. The right one is the new one you get.
------------------------------------------------------------------------------------------------------------------
Threading Core for Cannula-Wire-Loop

Colour grey,  autoclavable
Please watch the YouTube-Video for correct ergonomic use.
No Accessories included (neither Sealing/ O-Ring, nor Loop Holder, nor Cannulas, nor Wire nor the smooth-surfaced threading notch )   -   You get Your new smooth-surfaced threading notch after 3D-Printing.

This tool is a cannula holder, a threading aid and an assembly stand in one and makes it easy to create a wireloop:
1.) by threading the fine wire ends into thin cannulas. After fixing the wire ends with light-curing composite
2.) it helps to insert the wireloop-cannula-combination into one of two re/autoclavable loop holder variants: single-use or multi-use. Now the mounted cannula-wire loop combination is protected from damage too, i.e. kinking or slipping out of the wire loop. The complete set can be removed from the tool, the wire is wound up and clamped  unter the sealing ring (multi-use loop holder) respective clamped unter the cannula and hung unter the hook (single-use loop holder).
By welding each prepared wireloop set into sterile packaging and autoclaving them, they can be stored until use.

---- And here you can have a look at the loop holders (availabe in sets of three or seven pieces):
single-use: 04: Storage for Canula-Wire-Loop, 3 pieces (2ZHXPASJC) by acs_sw (shapeways.com)
multi-use: 04: Storage for "FR" Canula-Wire-Loop, 3 pieces (T9NPVN64F) by acs_sw (shapeways.com)

In preparation for the exercise, the multifunctional loop holder is on the one hand an assembly aid on the fragment remover handle "Csögör" or "FragRemover" (R) and protects the loop from slipping out of the cannula until needed. On the other hand, it is an instrument for trimming the loop and for bending the cannula to match the treatment area. And if the wire loop should break or if you want to change to a different wire size, you will not lose any time: You can even put the first loop back into the first holder and re-/ assemble a new loop from the next loop holder - within just 10 seconds! This well thought-out system supports your ergonomic, relaxed and fast work - even in difficult cases.
If you do not order the loop holder, please hang a paper clip in the needle-wire loop combination. This prevents the wire loop from being drawn into the cannula due to the required wire tension during assembly on the handle.

Please watch the YouTube-Video too.

Further information about the accessories here in the shop can be found on my homepage:
https://www.csoegoer.de/fragmententfernung-griff-nach-csoegoer
Details
What's in the box:
-2wg-Kombi-4-2
Dimensions:
4.74 x 5.61 x 0.72 cm
Switch to inches
1.86 x 2.21 x 0.28 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.