Orange Processed Versatile Plastic
un-Stuck 3G Skid w/Hulkster Spacer
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$33.02
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This skid is for the un-Stuck 3G Chassis Kit and comes with a .120 spacer for mounting and adjusting the Hulkster Transmission.
Some motors and Hulkster transmissions may come into contact with the lower front links. The included spacer will bolt to the stock Hulkster Trans and allow for angling the motor away from the lower links and the upper link nut close to the motor.
You will need 2* 3x12mm screws and 2* 3mm nuts when using the plate.
The holes in the skid are not lined up for a Hulkster when spacer is not used.
BUT you can use the left side hole and drill your own second hole if you are comfortable doing so.
Some motors and Hulkster transmissions may come into contact with the lower front links. The included spacer will bolt to the stock Hulkster Trans and allow for angling the motor away from the lower links and the upper link nut close to the motor.
You will need 2* 3x12mm screws and 2* 3mm nuts when using the plate.
The holes in the skid are not lined up for a Hulkster when spacer is not used.
BUT you can use the left side hole and drill your own second hole if you are comfortable doing so.
Details
What's in the box:
chassis v7-skid-hulkster w-spacer
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$16.20
$30.89
$33.58
$34.93
