You must be logged in and verified to contact the designer.
Product Description
Six generic 1/25 scale pre-drilled distributors in 3 different heights. Designed for 26-30 gauge wire. Holes may need to be opened slightly with a pin drill for ignition wires to fit, depending on wire gauge and insulation thickness. Designed for V8 engines.
These distributors are each about 4.2mm in diameter.
//Update March 10, 2019: Based on feedback and test prints, the holes have been enlarged to fit a .48mm OD wire, so common 1/25 ignition detail wire products (IE Detail Master) should fit without modification.
If you experience problems fitting wire into the Version 1 distributors, we suggest shaving the end of the wire very slightly (not enough to strip it) in order to taper it, allowing the wire to slide into the hole for a firm press-fit.
Finally, apologies for the price increase, this is due to Shapeways' pricing updates and out of our control.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: