Clear Ultra Fine Detail Plastic
1/350 Denton Rafts x50 (HMS Hood)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$15.20
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
These are highly detailed 1/350 Scale Royal Navy Denton Rafts x50. These have been modelled from photographic reference and dimensions supplied by the HMS Hood Association website (3ft x 3ft).
Ideal for the Trumpeter 1/350 Scale HMS Hood.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Ideal for the Trumpeter 1/350 Scale HMS Hood.
- Fastening ropes printed in place
- Printed on sprue to make painting or airbrushing easy.
- Set contains 50, should be plenty for most subjects.
- Modelled specifically for 1/350 Scale
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Details
What's in the box:
350 Denton Rafts
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
