Gray PA12
J80 tested on IMS 80 mast
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$81.11
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Built using the best factory nylon in a choice of two colors: Black or Gray.
French-built 2004 J80 with Sparcraft IMS 80 mast.
Tested with A117 compression slugs and Kiwi 9-70 sail slugs.
IMPORTANT, this custom Sail Entry was cut to: 78mm x 17mm. Yours might be different...
Contact Tom Luque at info@MastGates.com to request gates to match your cut-out.
To install, you will need to purchase : # 34 drill; 4-40NC tap; stainless 4-40 x 3/8" hex cap screws; 3/32" hex key and anti-sieze paste, like MareLube, for the threads.
build ref# PG335A-G1.13
French-built 2004 J80 with Sparcraft IMS 80 mast.
Tested with A117 compression slugs and Kiwi 9-70 sail slugs.
IMPORTANT, this custom Sail Entry was cut to: 78mm x 17mm. Yours might be different...
Contact Tom Luque at info@MastGates.com to request gates to match your cut-out.
To install, you will need to purchase : # 34 drill; 4-40NC tap; stainless 4-40 x 3/8" hex cap screws; 3/32" hex key and anti-sieze paste, like MareLube, for the threads.
build ref# PG335A-G1.13
Details
What's in the box:
J80-ok-PG335A-G1.13
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
