LUTUM® eco extruder Barrel 1.6
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$98.71
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This the Barrel section of the LUTUM® eco Extruder.
If you purchase this as a DIY kit you still need to tap a thread into the tiny hole on the top to fix the upper part after assembly. You also need to fit the metal thread part as shown in the pictureyourself. It is a stainless steel thread size 3/4" with a length of 30mm. It screws directly into the Nylon but needs some PTFT tape to properly set.
SKU LUTUM-eco-A-R5
If you purchase this as a DIY kit you still need to tap a thread into the tiny hole on the top to fix the upper part after assembly. You also need to fit the metal thread part as shown in the pictureyourself. It is a stainless steel thread size 3/4" with a length of 30mm. It screws directly into the Nylon but needs some PTFT tape to properly set.
SKU LUTUM-eco-A-R5
Details
What's in the box:
barrel extruder lutum-eco-R6
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
