White Natural Versatile Plastic
Catalina 22, TD18, 5 7/8"
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$78.22
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
MastGate nylon Snap-in insert with Track Depth of 18mm.
Made for feed slot cut length of 5 7/8", Width 1/2"
You will need to route grooves into the side walls of the feed slot and drill two holes for the bottom nipples.
Video instructions on Youtube. https://youtu.be/VvgMuhgE8TI
WHITE textured nylon surface can be dyed a color. BLACK is best for UV protection.
DRILLING INSTALLATION for Nipple pin :
The insert sleeve is symmetrical, with two protruding nipple pins.
Insert a #55 drill bit into each nipple pin's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum channel.
Remove the insert to center punch marks and complete the drilling. Use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs.
Nipple pins of the nylon insert will key into the holes to prevent unintentional sliding in the channel.
REMOVAL:
Top & Bottom ends of the insert sleeve have outer edge notches. Squeezing notches together with a large tweezer or hemostat type plyers make it easy to pull the insert up & out.
For warranty and support, please register your purchase:
Name, phone number, and email, the part number ordered, sailboat's year, make & model to:
Tom Luque at info@MastGates.com
file rev. Catalina 22 TD18 L149.2 PG788B
Made for feed slot cut length of 5 7/8", Width 1/2"
You will need to route grooves into the side walls of the feed slot and drill two holes for the bottom nipples.
Video instructions on Youtube. https://youtu.be/VvgMuhgE8TI
WHITE textured nylon surface can be dyed a color. BLACK is best for UV protection.
DRILLING INSTALLATION for Nipple pin :
The insert sleeve is symmetrical, with two protruding nipple pins.
Insert a #55 drill bit into each nipple pin's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum channel.
Remove the insert to center punch marks and complete the drilling. Use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs.
Nipple pins of the nylon insert will key into the holes to prevent unintentional sliding in the channel.
REMOVAL:
Top & Bottom ends of the insert sleeve have outer edge notches. Squeezing notches together with a large tweezer or hemostat type plyers make it easy to pull the insert up & out.
For warranty and support, please register your purchase:
Name, phone number, and email, the part number ordered, sailboat's year, make & model to:
Tom Luque at info@MastGates.com
file rev. Catalina 22 TD18 L149.2 PG788B
Details
What's in the box:
Catalina 22 TD18 L149.2 PG788B
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$60.88
$32.00
$43.66