You must be logged in and verified to contact the designer.
Product Description
This is a adapter cover that will re loacted the wheel to a lower and natural feel just like the higher end radios.
Installing
removed the two screw holding on the wheel
. then the cover pops off.
carfuly removed the small wire thats attached to the main board. slight tug should pop out
take new drop down cover and feed the wire through the opening then using a very small flat head screw driver push in the white plug till it clips into the board. then resemble the new adapter plate, bottom first clip then push to click. reinstall the two screws to cover.
wheel cover a secondary two screws is needed to hold wheel cover and its sized just like the small screws that came out of the cover plate. wheel cover snaps into place and re install wheel
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: