Clear Ultra Fine Detail Plastic
1/32 DKM U-Boot 37mm SK C/30 Single Gun
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$300.50
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/32 scale very hi detailed and accurate model of 3.7 cm/L83 (1.5") SK C/30 Deck AA Single Gun Mounting for Germany Kriegsmarine Nazy ships.
The 3.7 cm/L83 SK C/30U was designed for use on U-boats and was used on a "wet-mount."
Ship Class Used On: This AA weapon was used on almost all ships of World War II,
Single Mounting:
S-Boats: Ein LC/34
U-Boat Single: Most U-Boats: Ubts LC/39
Real scaled from original.
Hollowed to saved material.
Model unpainted.
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
The 3.7 cm/L83 SK C/30U was designed for use on U-boats and was used on a "wet-mount."
Ship Class Used On: This AA weapon was used on almost all ships of World War II,
Single Mounting:
S-Boats: Ein LC/34
U-Boat Single: Most U-Boats: Ubts LC/39
Real scaled from original.
Hollowed to saved material.
Model unpainted.
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Details
What's in the box:
1/32 DKM U-Boot 37mm SK C/30 Single Gun
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$15.42
$15.65
