MP6-Box/Flat Motor,Angle,Adj,Thick Spherical Bush
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$16.00
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
MP6 - 3D printed Motor Pod for Slot It 4 hole mounting.
- Designed to fit Slot It & JA Slots Chassis.
- Anglewinder configuration.
- This MP is designed for the JA slots Nascar chassis to fit thicker rear tyres, alternatively the extra piece on the side of a Sloit It MP can be cut away and then used.
- Fits Boxer/Flat6 Motor.
- Fits SCX Spherical bushes, SCX (50440).
- Use M2 Flat head or grub screws to mount motor to the MP.
- Bush height adjustment of 1mm, using M2 grub screws for rear axle ride height adjustment.
- Space for Slot It Magnet (CN06).
- Some trimming may be needed due to the nature of 3D printing.
Parts Included:
1x Motor Pod
(Ref: JA6)
- Designed to fit Slot It & JA Slots Chassis.
- Anglewinder configuration.
- This MP is designed for the JA slots Nascar chassis to fit thicker rear tyres, alternatively the extra piece on the side of a Sloit It MP can be cut away and then used.
- Fits Boxer/Flat6 Motor.
- Fits SCX Spherical bushes, SCX (50440).
- Use M2 Flat head or grub screws to mount motor to the MP.
- Bush height adjustment of 1mm, using M2 grub screws for rear axle ride height adjustment.
- Space for Slot It Magnet (CN06).
- Some trimming may be needed due to the nature of 3D printing.
Parts Included:
1x Motor Pod
(Ref: JA6)
Details
What's in the box:
MP6-Angle_NoPivot_Adjust_Thick-Spheri_Bush_Boxer_M
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
