TC4 Gear Diff Outdrive (B44.3)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$31.02
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Outdrives for use with Associated part #9948 B44.3 Gear Diff. These will allow the gear diff to work with a TC4 or FT TC4 touring car.
*If using the stock gear cases you will have to clear material in the gear case for the differential to fit.
*Drop in fit for AMA TC4 Transmission case set
Top: https://www.shapeways.com/product/7NFD7KPN4/tc4-transmission-case-top?optionId=64100038&li=marketplace
Bottom: https://www.shapeways.com/product/VUV85RSNP/tc4-transmission-case-bottom?
optionId=64100043&li=marketplace
**Due to printing tolerances the part may not be a drop in fit to the differential case. Always test fit before starting the build. Recommended to spin the part in a drill and polish/sand the shaft and outdrive diameters. The dogbone slot can be prepped with a thin file on the slot walls or using the face of a rotary disc. The inner cavity for the dogbones can be prepped with a rotary grinding bit in a circular motion. Verify the pin hole is ~2mm and the pin can be inserted easily.
*If using the stock gear cases you will have to clear material in the gear case for the differential to fit.
*Drop in fit for AMA TC4 Transmission case set
Top: https://www.shapeways.com/product/7NFD7KPN4/tc4-transmission-case-top?optionId=64100038&li=marketplace
Bottom: https://www.shapeways.com/product/VUV85RSNP/tc4-transmission-case-bottom?
optionId=64100043&li=marketplace
**Due to printing tolerances the part may not be a drop in fit to the differential case. Always test fit before starting the build. Recommended to spin the part in a drill and polish/sand the shaft and outdrive diameters. The dogbone slot can be prepped with a thin file on the slot walls or using the face of a rotary disc. The inner cavity for the dogbones can be prepped with a rotary grinding bit in a circular motion. Verify the pin hole is ~2mm and the pin can be inserted easily.
Details
What's in the box:
TC4 Gear Diff Outdrive (B44.3)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
