You must be logged in and verified to contact the designer.
Product Description
This print frame contains 5 flagpoles
This is the flag stick at the stern for large naval battleships in scale 1:100. It was drawn after original drawings and pictures.
It can be lowered, a flag can be hoisted and there are the 3 lamps integrated for stern position lamp (white), rear anchor lamp (red) and a watch light (white). On the lamp housings there are holes for the carrying out of the strands from the LED´s .
There are 2 rods, one to hold the flagpole in upright position and one for the down position.
The single parts are in a pressure frame and can be hung up after removing from the pressure frame into the bollard. The flagpole consists of 7 different parts.
1. bollard with guard light, flag container and eyelets for the railing chains
2. flagpole with anchor lamp and stern light
3. 2 holding bars for upright position
4. boom to lay down
5. 2 retaining cleats for pos. 3 (mounting on deck)
6. an open loop to hang 4. on the flagpole
7. opening cleat for pos. 1. to insert the ropes into the bollard
As this flagpole consists of moving parts it is only offered in professional plastic as this material is suitable for functions.
Anyone who orders this movable flagpole will receive a PDF with instructions for assembly and a template for drilling the holes on deck via PN Shapeways.
There is this flagpole in my shop also without function, made of smooth fine plastic.
Dieser Druckrahmen beinhaltet 5 Flaggenstöcke
Dies ist der Flaggenstock am Heck für Großkampfschiffe der Kriegsmarine im Massstab 1:100. Er wurde nach Orginalzeichnungen und Bildern gezeichnet.
Er ist niederlegbar, es kann eine Flagge gehisst werden und es sind die 3 Lampen integriert für Heckpositionslampe (weiß), hintere Ankerlampe (rot) und ein Wachlicht (weiß). An den Lampengehäusen sind Löcher für das durchführen der Litzen von den LED´s vorhanden.
Es gibt 2 Gestänge, eins um den Flaggenstock in aufrechter Position zu halten und eins für die niedergelegte Position.
Die einzelnen Teile sind in einem Druckrahmen und können nach dem Entfernen aus dem Druckrahmen in den Poller eingehängt werden. Der Flaggenstock besteht aus 7 verschiedenen Teilen.
1. Poller mit Wachlicht, Flaggenbehälter und Ösen für die Relingketten
2. Flaggenstock mit Ankerlampe und Hecklicht
3. 2 Haltestangen für aufgerichtete Position
4. Gestänge zum niederlegen
5. 2 Halteklampen für Pos. 3. ( Befestigung auf Deck)
6. Eine offene Öse zum einhängen von 4. am Flaggenstock
7. Klampe zum öffnen für Pos 1. zum einlegen der Taue in den Poller
Da dieser Flaggenstock aus beweglichen Teilen besteht wird er nur in professional Plastic angeboten da dieses Material für Funktionen geeignet ist.
Jeder der diesen beweglichen Flaggenstock bestellt bekommt per PN über Shapeways eine PDF mit Anleitung zum Zusammenbau und Schablone zum bohren der Löcher auf Deck von mir zugeschickt.
Es gibt diesen Flaggenstock in meinem Shop auch ohne Funktion, aus smooth fine plastic.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: