Black Natural Versatile Plastic
Ring Doorbell Pro 90 Degree Wedge
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$67.51
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Ring has updated their Doorbell Pro. The new design will not mount flush with this wedge. They have added a heatsink to the back of the doorbell. If you have this new model please do not buy this wedge. I plan to update the wedge for the new design as soon as possible.
Thank you
Ring Doorbell Pro 90 Degree Wedge for the Ring Doorbell Pro
Please Read: I a lot of people have asked for a 90 Degree Wedge. The reason it took so long is that I didn’t have a good mounting solution till now. I Just discover ratcheting wrenches. They let you drive screw in tight spots.
If your Ring Pro is going to be parallel to a wall, I would recommend the 70-degree wedge over this one. The reason I had to create the 30 degree wedge, is because the Ring Doorbell Pro made a hotspot at night on the wall. So, you should avoid having Ring Doorbell Pro be parallel to a wall. Plus, if you have a wall next to your camera, you will lose some usable picture, cause the camera has 160 wild angle lens. You will see what I mean if you look at the pics of the 30 degree wedge.
This Wedge can be flipped to support right or left-hand entryways.
To install the Wedge:
You only need 2 screws. I include 4 mounting holes to give the installer options.
Pre-drill the top Hole, then Use a #8 x 1” hex screw, to install the wedge, do not tighten all the way. Level the Wedge, and Mark the bottom screw. Uninstall the wedge and pre-drill the 2nd hole. Then install the Wedge the screws.
This is what I used for the installation:
Screw
Ratcheting Wrenches
Please Note: The wedge does not include wood screws or ratcheting wrench.
Thank you
Ring Doorbell Pro 90 Degree Wedge for the Ring Doorbell Pro
Please Read: I a lot of people have asked for a 90 Degree Wedge. The reason it took so long is that I didn’t have a good mounting solution till now. I Just discover ratcheting wrenches. They let you drive screw in tight spots.
If your Ring Pro is going to be parallel to a wall, I would recommend the 70-degree wedge over this one. The reason I had to create the 30 degree wedge, is because the Ring Doorbell Pro made a hotspot at night on the wall. So, you should avoid having Ring Doorbell Pro be parallel to a wall. Plus, if you have a wall next to your camera, you will lose some usable picture, cause the camera has 160 wild angle lens. You will see what I mean if you look at the pics of the 30 degree wedge.
This Wedge can be flipped to support right or left-hand entryways.
To install the Wedge:
You only need 2 screws. I include 4 mounting holes to give the installer options.
Pre-drill the top Hole, then Use a #8 x 1” hex screw, to install the wedge, do not tighten all the way. Level the Wedge, and Mark the bottom screw. Uninstall the wedge and pre-drill the 2nd hole. Then install the Wedge the screws.
This is what I used for the installation:
Screw
Ratcheting Wrenches
Please Note: The wedge does not include wood screws or ratcheting wrench.
Details
What's in the box:
90 degree wedge
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
