Chassis Kit WAP1327 BMW 320 GR.5 Sideways Body

Posillipo Slot Car designs chassis for 1/32 scale cars intended for expert hobbyists to experiment and have fun in a new experience.
Check our site at this link https://www.posilliposlotcar.com/ before deciding to purchase this product

This product is compatible with the BMW 320 Gr.5 body by Sideways.
The Alfacode for compatibility with other components designed for the same car model is AP.
All components identified as “xAPxxxx” are compatible and replaceable on these models.

The Kit includes the Main chassis, the sidewinder Inner chassis, four spring Retainers, and two Standard forward Retainers.
The powertrain configuration is sidewinder short can motor.
This Inner chassis accepts single flanged ball bearings or bushings and is sized to host the oXigen chip.
The front axle height of the is adjustable using M1 grub screws.
The body to chassis height is adjustable at the front, using grub screws
The two rear side posts on the main chassis are dedicated to limit the vertical travel of the Inner Chassis.
Install the suspension using the Springs Retainers at the four Main to Inner chassis posts
Alternatively, install the Standard Retainers alone at the forward posts
A light rework of the serial interior may be necessary when using 17.5 or 18.0 mm diameter crowns. Install a lexan interior for best performance.

Pinion/crown best matches are: 7.5 / 16.8 mm; Alternatively, you may use 6.75/17.5 mm or 6.5/18.0 mm.
No mechanical parts are included in this Kit.

Always browse the Posillipo website at this link https://www.posilliposlotcar.com/ for assembly guidance, explanation, FAQ and news about the upcoming releases

Posillipo Slot owns the intellectual property of this product.
This is not a Slot it, oXigen, BMW or Sideways product.