Aluminum
Beta - LSS Planetary Gear v2 in Aluminum
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$18.50
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This Aluminum planet gear is a BETA version as it is untested so far and I'm unsure of the dimensional tolerances of it. This version has an inner hole diameter of 10.3mm to allow for more clearance due to the surface roughness. This may significantly improve the life of the LSS as the planet gear will generally wear out much sooner than the other gears.
You will need to source a neodymium magnet (10mm x 3mm) and glue it into the planetary gear. When glueing in place, make sure to clamp the assembly with a clamp or locking pliers for a few hours to ensure the magnet sits flush with the gear while the glue dries. Use a strong glue and put glue on both the magnet edge and the gear edge.
Notes: This is a DIY product, assembly required. Buyer assumes all responsibility. May void your warranty. Do so at your own risk. Please follow all local laws.
You will need to source a neodymium magnet (10mm x 3mm) and glue it into the planetary gear. When glueing in place, make sure to clamp the assembly with a clamp or locking pliers for a few hours to ensure the magnet sits flush with the gear while the glue dries. Use a strong glue and put glue on both the magnet edge and the gear edge.
Notes: This is a DIY product, assembly required. Buyer assumes all responsibility. May void your warranty. Do so at your own risk. Please follow all local laws.
Tags
BicyclesDetails
What's in the box:
Aluminum_Planet_Gear_Larger_Inner_Diameter
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
