Gray PA12
GB Proton Gun Switch Tool
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$11.98
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a tool I designed to remove the nut or tighten the nut on the face plate for the Ghostbusters Proton Gun Mod.
A spanner can not be used on the stock nut so designed this tool. If you a Shapeways member, log in you will then see a PRODUCT DOWNLOAD button in which you can 3d print your own tool if you require in the future or store the STL file with your manual for keepsake.
If you download I recommend the following settings:
- 0.2mm layers
- 50% fill
- 1.75 PLA
If you do not have a printer or a friend or a place to print it at you can order from Shapeways.
A spanner can not be used on the stock nut so designed this tool. If you a Shapeways member, log in you will then see a PRODUCT DOWNLOAD button in which you can 3d print your own tool if you require in the future or store the STL file with your manual for keepsake.
If you download I recommend the following settings:
- 0.2mm layers
- 50% fill
- 1.75 PLA
If you do not have a printer or a friend or a place to print it at you can order from Shapeways.
Details
What's in the box:
Tool - Switch Tightener v2
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
