This holder does not include the stock tablet holder that you see in the video and pictures, but only the 3d printed parts!!
you will have to either purchase it separately or use your old one if you have any.
you will also need:
4x 2.5mm screws / 10mm long
4x 2.5mm nuts
IF YOU DONT HAVE THOSE SCREWS SYOU CAN GLUE BOTH PARTS!
(in this case, makse sure you use a strong glue that you trust)
The center nut for the tripod is a 1/4INCH nut.
you can also get the complete FDM 3d printed set on our website:
http://www.Gimbal-Guard.com
here's where you can buy the DJI tablet holder:
https://www.aliexpress.com/item/Tablet-Phone-Mobile-Device-Extended-Holder-Clamp-Metal-Bracket-for-DJI-Phantom-4-3-Inspire-1/32735915225.html?spm=2114.01010208.8.92.v3ysjK
Thank you for watching!
Please subscribe, share, like, comment and don't forget to visit our website at:
http://www.Gimbal-Guard.com
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: