Clear Ultra Fine Detail Plastic
1/700 RN Triple 6" MKXXIII Turrets (4) HMS Fiji
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$15.89
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Highly detailed 1/700 scale RN MKXXII Triple 6 Inch Turrets model upgrade parts.
Ideal upgrades for Crown Colony Class Cruisers with Oerlikon tub on B Turret and Rangefinder on X turret i.e HMS Fiji.
Model is optimised for easy removal from base and supports can be be kept in place for airbrushing. Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Ideal upgrades for Crown Colony Class Cruisers with Oerlikon tub on B Turret and Rangefinder on X turret i.e HMS Fiji.
- Highly detailed and accurate replacement part for those
wishing to build Crown Colony Class Cruisers - Specifically designed for 1/700 scale
- Highly detailed Oerlikon Tub and Ammo Locker
- Printed without barrels in place
- See MY SHOP for other variants of this set
Model is optimised for easy removal from base and supports can be be kept in place for airbrushing. Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Details
What's in the box:
700 New 6 Inch Gun Sprue Fiji MKXXIII.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
