36 Highly detailed 1/600 scale 20mm Oerkion Gun Tubs Flattened Version suitable for most WW2 Allied warships.- .3mm splinter shield
- Detailed floor
- Easy removal from sprue
Some
part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "
Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "
Bestine" and "
Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended.
Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise damage to parts.
Please take a look at my other items.