Moza SR-P Lite Dayton Audio TT25 Mount SimRacing

Custom mount for Dayton Audio TT25 Puck with Moza SR-P Lite pedals. (also fits with Performance Kit for R5 Bundle). 

Attaches to the TT25s SMRK-2 Surface Mounting Ring. 

Required Fixtures:
2x Countersunk M4x 25mm bolts (Black)
2x Flanged M4 Nyloc Nuts (or m4 Nyloc Nut + M4 washer)
SMRK-2 Surface Mounting Ring + screws (Usually included with the PUCK)

Required Tools:
7mm Socket 
2.5mm Hex Key
Philips Screwdriver 

Fitting Instructions (see images):

Remove 1x original countersunk M4 pedal hex screw (2.5mm HEX)
Place part on the back of the pedal (double check the part orientation)
Fully screw in M4x25mm countersunk bolt (don't over-tighten)
Place M4 Flanged Nyloc nut in 7mm socket and hand tighten (don't over-tighten)

Remove 2nd original countersunk M4 pedal hex screw (2.5mm HEX)
Fully screw in 2nd M4x25mm countersunk bolt (don't over-tighten)
Place M4 Flanged Nyloc nut in 7mm socket and hand tighten (don't over-tighten)

Orientate and place TT25 PUCK (already attached to SMRK-2 Surface Mounting Ring) 
over the 3x mount holes. Use included SMRK-2 self-tapping Philips screws to attach the PUCK to the mount. (don't over-tighten).