RC4WD Blazer Cab Back + Interior Adapter

This is a cab back section used for converting the RC4WD Blazer body to a pickup. The rear bed must be cut at the correct location when using this cab back. A bed extension for the cut Blazer bed is also availible separately to complete the pickup conversion.

This version also includes an adapter piece that works with the stock RC4WD interior parts. You will need (2) M3x8mm Flat Head Socket Screws to attach the adapter to the cab back. The screw heads can be filled prior to priming and painting if desired.


IMPORTANT Usage Notes: You will want to wash the parts (Body and 3D Printed Parts) with warm, soapy water and dry well. Additionally, you will want to sand the surfaces that you will be bonding to on the RC4WD body or you may not make a strong bond. The surface of the 3D printed part is fairly porous and bonds well. Other than washing no other prep should be needed.