Black PA12
Y_MOD_SF_Right (Side Fire) SEE
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$51.67
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Special Side Fire Engraved 18650 Edition. BODY ONLY.
Right-Hand Version
For LEFT version, see here → https://www.shapeways.com/product/ZYA37XUNX/y-mod-sf-left-side-fire-see?key=86a037b1315758f2917a9b38b64a9bbd
Y_mod_SF is a pure mech mod that uses custom made components with a 22mm ModDog Nano V2 510. Its is made up of two parts, the body and the fire button. ONLY body is included here. You will also need to print a button, please see links below.
Dimensions: H72mm x W42mm x D26mm
FOR ADVANCED USERS ONLY –– REFER TO OTHER SOURCES FOR UNDERSTANDING OHMS LAW AND BATTERY SAFETY. NOT FOR BEGINNERS. SAFETY ALWAYS COMES FIRST!
WHAT IS INCLUDED:
1. Body of the mod that holds the 510, battery and bottle
YOU WILL ALSO NEED:
→ Y_mod_S BUTTON ONLY - printing in other colours/materials (0.5mm taller button here)
→ ModDog Nano V2 510 22mm Connector from Stealthvape or from ModDog direct.
→ Cloud Laboratory Y_mod_SF Silver Contact Plates from Stealthvape.
NOTE: If ModDog Nano V2 are not available in the requied size on their store, you can get any other size (16mm/18mm/22mm) and one of their top plates "flatter" in required size. Please check ModDog website for more information.
Fire button shown in the photos was printed in "Smooth Fine Detail Plastic" which produces the highest quality of detail, dyed black and buffed for shine.
RECOMMENDED BOTTLES:
– GOLDILOCKS BOTTLE 7.15ML - 46MM X 18.5MM BLACK
– Sunbox Cappy R 8ml (Medium)
– Also fits any other 18.5mm maximum diameter bottles (round)
BUILDING THE MOD (using CloudLab contacts):
– Place the fire button in position (note logo orientation)
– Place the long contact plate in the designated groove in the body
– Place the negative(short) contact plate and align with 510 hole
- Place the 510 nut over the top plate and align
- Attach the 510 to the 510 toolkit and feed through the body 510 hole turning it so it catches the nut
- Keep turning until fixed
– Place the 510 contact plate in alignment with the long plate and adjust to suit the trhow you like.
- Pick up the small nut with long tweezers, hold tight and feed through the bottle hole into the 510 and turn until it catches.
- Tghten the positive nut on the 510.
- Your mod is now complete.
For information on components and build photos and video see here.
CAUTION/NOTES
GENERAL: If long plate touches the 510 contact plate at the same time will cause the mod to autofire. The contact should be kept good distance away to allow for button throw and only touch when the fire button is pressed.
UNEVEN SURFACES: Due to the nature of Professional Plastics material, you may end up with top or bottom surface showing burls or being uneven. Simply run some 400 grit wet&dry sandpaper, working your way towards 800 grit. Professional Plastics have the same inner core as the external surface so you can sand these to your liking. If you prefer delrin-like finish, work your way towards 1000 and 1200 grit for super smooth finish.
3D PRINT RESIDUE: Please clear any small gaps of residue left by the 3d printing. This is especially the case with the recessed areas that hold the bottom plate in place. There maybe some dust leftover preventing the plate to be in perfect position.
TOLERANCES: If you find that there is some tolerances issues like for example the fire button doesn't smoothly go through the opening, please DO NOT sand it, its just residue from the 3d printing and will smooth out after use. Simply running the button through the opening a few times will sort this out. Same goes for the gaps where the long contact plate sits.
FIXING THE 510: I also recommend using MM 510 510 Tightening Kit or ModDog 510 Assembling Tool with 510 Connectors Wrench Keychain otherwise you may lock up your atty in 510 as you are screwing down the 510.
SAFETY: There are no locks on this mod so safety comes first. The contacts are known to bend over time and dirt may collect on the plates. This dirt can also act as a bridge and cause autofire. This is the case with ALL mech mods so regular cleaning of your contacts is a must. If silver coated contacts, use rubber ereaser to remove any residue/dirt that has collected. For colid copper contacts (custom made) please follow guidlines on maintaining copper. Finally, REMOVE BATTERY FROM YOUR MOD WHEN NOT IN USE – which is the only way to ensure 100% safety.
Q/A
Q: Are there more pictures of the mods so I can see how they look IRL?
A: Yes, see link above for making of photos or join our Facegroup for regular updates and pictures from users.
Q: Is there a tube that hides the battery?
A: No, the battery is exposed in this version.
Q: My fire button is a bit wobbly, how do I fix this?
A: Bend the long contact plate slightly towards the button - in an arc shape. This will force it into place and hold it there nice and tight.
Q: Can I adjust the trow on my button?
A: Yes, adjust the position of the 510 contact plate.
Need more help? Join the Facebook Group → https://www.facebook.com/groups/174399370002485/
Improvements planned for Ver 1.1
- None at the moment
Right-Hand Version
For LEFT version, see here → https://www.shapeways.com/product/ZYA37XUNX/y-mod-sf-left-side-fire-see?key=86a037b1315758f2917a9b38b64a9bbd
Y_mod_SF is a pure mech mod that uses custom made components with a 22mm ModDog Nano V2 510. Its is made up of two parts, the body and the fire button. ONLY body is included here. You will also need to print a button, please see links below.
Dimensions: H72mm x W42mm x D26mm
FOR ADVANCED USERS ONLY –– REFER TO OTHER SOURCES FOR UNDERSTANDING OHMS LAW AND BATTERY SAFETY. NOT FOR BEGINNERS. SAFETY ALWAYS COMES FIRST!
WHAT IS INCLUDED:
1. Body of the mod that holds the 510, battery and bottle
YOU WILL ALSO NEED:
→ Y_mod_S BUTTON ONLY - printing in other colours/materials (0.5mm taller button here)
→ ModDog Nano V2 510 22mm Connector from Stealthvape or from ModDog direct.
→ Cloud Laboratory Y_mod_SF Silver Contact Plates from Stealthvape.
NOTE: If ModDog Nano V2 are not available in the requied size on their store, you can get any other size (16mm/18mm/22mm) and one of their top plates "flatter" in required size. Please check ModDog website for more information.
Fire button shown in the photos was printed in "Smooth Fine Detail Plastic" which produces the highest quality of detail, dyed black and buffed for shine.
RECOMMENDED BOTTLES:
– GOLDILOCKS BOTTLE 7.15ML - 46MM X 18.5MM BLACK
– Sunbox Cappy R 8ml (Medium)
– Also fits any other 18.5mm maximum diameter bottles (round)
BUILDING THE MOD (using CloudLab contacts):
– Place the fire button in position (note logo orientation)
– Place the long contact plate in the designated groove in the body
– Place the negative(short) contact plate and align with 510 hole
- Place the 510 nut over the top plate and align
- Attach the 510 to the 510 toolkit and feed through the body 510 hole turning it so it catches the nut
- Keep turning until fixed
– Place the 510 contact plate in alignment with the long plate and adjust to suit the trhow you like.
- Pick up the small nut with long tweezers, hold tight and feed through the bottle hole into the 510 and turn until it catches.
- Tghten the positive nut on the 510.
- Your mod is now complete.
For information on components and build photos and video see here.
CAUTION/NOTES
GENERAL: If long plate touches the 510 contact plate at the same time will cause the mod to autofire. The contact should be kept good distance away to allow for button throw and only touch when the fire button is pressed.
UNEVEN SURFACES: Due to the nature of Professional Plastics material, you may end up with top or bottom surface showing burls or being uneven. Simply run some 400 grit wet&dry sandpaper, working your way towards 800 grit. Professional Plastics have the same inner core as the external surface so you can sand these to your liking. If you prefer delrin-like finish, work your way towards 1000 and 1200 grit for super smooth finish.
3D PRINT RESIDUE: Please clear any small gaps of residue left by the 3d printing. This is especially the case with the recessed areas that hold the bottom plate in place. There maybe some dust leftover preventing the plate to be in perfect position.
TOLERANCES: If you find that there is some tolerances issues like for example the fire button doesn't smoothly go through the opening, please DO NOT sand it, its just residue from the 3d printing and will smooth out after use. Simply running the button through the opening a few times will sort this out. Same goes for the gaps where the long contact plate sits.
FIXING THE 510: I also recommend using MM 510 510 Tightening Kit or ModDog 510 Assembling Tool with 510 Connectors Wrench Keychain otherwise you may lock up your atty in 510 as you are screwing down the 510.
SAFETY: There are no locks on this mod so safety comes first. The contacts are known to bend over time and dirt may collect on the plates. This dirt can also act as a bridge and cause autofire. This is the case with ALL mech mods so regular cleaning of your contacts is a must. If silver coated contacts, use rubber ereaser to remove any residue/dirt that has collected. For colid copper contacts (custom made) please follow guidlines on maintaining copper. Finally, REMOVE BATTERY FROM YOUR MOD WHEN NOT IN USE – which is the only way to ensure 100% safety.
Q/A
Q: Are there more pictures of the mods so I can see how they look IRL?
A: Yes, see link above for making of photos or join our Facegroup for regular updates and pictures from users.
Q: Is there a tube that hides the battery?
A: No, the battery is exposed in this version.
Q: My fire button is a bit wobbly, how do I fix this?
A: Bend the long contact plate slightly towards the button - in an arc shape. This will force it into place and hold it there nice and tight.
Q: Can I adjust the trow on my button?
A: Yes, adjust the position of the 510 contact plate.
Need more help? Join the Facebook Group → https://www.facebook.com/groups/174399370002485/
Improvements planned for Ver 1.1
- None at the moment
Details
What's in the box:
Y_MOD_SF_B3_SEE_001_RIGHT
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$35.00
