TC02C STAND UP GEARBOX 3-4 RH 06 Feb 2018

Hi all,

IMPORTANT NOTICE : ALL THE SCREW HOLES TO BE TAPERED HAVE TO BE RE-DRILLED BY 2.2MM BEFORE THE 1ST ASSEMBLING.

STAND-UP 3/4 gears gearbox designed for TeamC TC02C 1st release 2wd mid motor RC EP racing car. It works with 2x 28T or 1x28T idler gears and Team C or AE gear differential (EVO rear T-plate needed).

This set includs 1x RH housing only, the LH housing and a bushing set is needed to complete the gearbox housing.

It fits the stock motor plate and 78T spur gear covers 3 and 4 are available separatly.

That design allows to set simultaneously whole the internal gear meshes according to both 28T idler gears diameter. It fixes the compatibility issue with Team C aluminum idler gears.
They should also last longer.
3 settings available :
- large (+0.10mm on both idlers diameter)
- normal
- worn (-0.10mm on both idlers diameter)
For reference, the average radial gap between 48DP gears is about 0.13mm.
The 3 gears gearmesh cannot be set.

That design is EVO waterfall ready.
The general wall thickness does not exceed the original Team C (1.7MM).

Thanks for your interest.