SIG Sauer P226 Beavertail add-on brace
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$26.49
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Do you have a basic SIG Sauer P226 model and really want the beavertail of the Elite or Legion models?
Now you can - but even BETTER!
This functional beavertail add-on brace provides useful contact with the back of the hand between the thumb and fingers, giving better stability and recoil control. The grip now feels more like a handshake than a hold, grasping the pistol pushes the brace down on your hand for better control and accuracy. You’ll notice the profile is not the same as the SIG factory beavertail variants, the underside curve follows the grip rearward for contact with the backside of the hand.
NO PERMANENT MODIFICATIONS. The add-on beavertail replaces the plastic hammer block, that small square of plastic, visible from the rear of the pistol directly below the hammer. The hammer block is held in place by a pin pressed in from the side (covered by the grip panels). The add-on beavertail has a replacement hammer block built in that replaces the original block. Swap the small spring inside the block from the original to the new part and press in the original pin. Reversal without any indication of installation possible at any time.
SIMPLE INSTALLATION: Remove the hammer block and replace with the add-on beavertail using the standard SIG procedure. While this is possible to do for the amateur SIG hobbyist with a small punch set, this is still a procedure that is important to do correctly. GUNSMITH INSTALLATION RECOMMENDED if you are not familiar with these parts.
What's the difference between Black Natural Versatile Plastic and Black Premium Versatile plastic? The Natural has a rougher surface and the Premium has a smoother surface similar to the pistol frame.
Now you can - but even BETTER!
This functional beavertail add-on brace provides useful contact with the back of the hand between the thumb and fingers, giving better stability and recoil control. The grip now feels more like a handshake than a hold, grasping the pistol pushes the brace down on your hand for better control and accuracy. You’ll notice the profile is not the same as the SIG factory beavertail variants, the underside curve follows the grip rearward for contact with the backside of the hand.
NO PERMANENT MODIFICATIONS. The add-on beavertail replaces the plastic hammer block, that small square of plastic, visible from the rear of the pistol directly below the hammer. The hammer block is held in place by a pin pressed in from the side (covered by the grip panels). The add-on beavertail has a replacement hammer block built in that replaces the original block. Swap the small spring inside the block from the original to the new part and press in the original pin. Reversal without any indication of installation possible at any time.
SIMPLE INSTALLATION: Remove the hammer block and replace with the add-on beavertail using the standard SIG procedure. While this is possible to do for the amateur SIG hobbyist with a small punch set, this is still a procedure that is important to do correctly. GUNSMITH INSTALLATION RECOMMENDED if you are not familiar with these parts.
What's the difference between Black Natural Versatile Plastic and Black Premium Versatile plastic? The Natural has a rougher surface and the Premium has a smoother surface similar to the pistol frame.
Details
What's in the box:
P226 BEAVER ADD-ON V28
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
