White Natural Versatile Plastic
Product Description
Best Cost
Very High Detailed and Accurate 1/192 scale MK12 Missile launcher with the RIM-8 TALOS missiles for US Navy ships. Twin-arm launcher for the RIM-8 Talos missile. Employed below main deck magazines.
Stong and Flexible Plastic is very economical when compared to other materials, is completely waterproof, lightweight, and resistant to BB fire. It's detail is softer than other material (surface details will print thicker), it is not easily sandable and requires paints intended for nylon
Used for:
RIM-8 Talos SAM
Used on:
USS Long Beach Nuclear Missile Cruisers Terrier
USS Oklahoma City CL91 / CLG5 / CG5
Albany class Cruiser (CG 10, CG 11, CG 12)
USS Little Rock (CLG 4 / CG 4)
USS Colombus (CG-12)
Real scaled from original
Hollowed to saved material
Model unpainted
Set 3 Units
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Very High Detailed and Accurate 1/192 scale MK12 Missile launcher with the RIM-8 TALOS missiles for US Navy ships. Twin-arm launcher for the RIM-8 Talos missile. Employed below main deck magazines.
Stong and Flexible Plastic is very economical when compared to other materials, is completely waterproof, lightweight, and resistant to BB fire. It's detail is softer than other material (surface details will print thicker), it is not easily sandable and requires paints intended for nylon
Used for:
RIM-8 Talos SAM
Used on:
USS Long Beach Nuclear Missile Cruisers Terrier
USS Oklahoma City CL91 / CLG5 / CG5
Albany class Cruiser (CG 10, CG 11, CG 12)
USS Little Rock (CLG 4 / CG 4)
USS Colombus (CG-12)
Real scaled from original
Hollowed to saved material
Model unpainted
Set 3 Units
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Details
What's in the box:
1/192 USN MK12 GMLS Set x3
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
