You must be logged in and verified to contact the designer.
Product Description
Rear upper link riser mount for the Axial Capra. This allows for better geometry of the rear upper links by increasing triangulation and improving anti-squat, combating the tendency for the front end to pull up on steep limbs once the rear tires bind during traction.
Rear upper links are raised by 12mm, while still retaining the same axle pinion geometry. Links are also mounted approximately 15mm in towards center (each side), thereby improving upper link triangulation.
This is a drop-in part, no modifications are required to the axle. Stock hardware is used to mount the riser to the axle at the original link mount pockets. An M3 x 30 screw and M3 locknut are required to mount the links to the riser. This will work with stock 97mm shocks or aftermarket 90mm shocks.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: