Gray PA12
2x_C-Hub_Zero Deg_10mm hole
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$22.19
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a C-Hub with Zero Deg and a 10mm hole.
If you have custom axles that you want to build and uses a 10mm tube /carbon or aluminum), this is a good option.
They are held in place with 4 screews/setscreews and it is advised to drill the tube once the castor angle is set.
It can use my own Zero Deg Knuckle but should also be compatible with other models like the dlux or Pat13 knuckles (as long as they are zero degrees).
If you have custom axles that you want to build and uses a 10mm tube /carbon or aluminum), this is a good option.
They are held in place with 4 screews/setscreews and it is advised to drill the tube once the castor angle is set.
It can use my own Zero Deg Knuckle but should also be compatible with other models like the dlux or Pat13 knuckles (as long as they are zero degrees).
Details
What's in the box:
2x_C-Hub_10mm_hole_V2
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
