You must be logged in and verified to contact the designer.
Product Description
Bugaboo Cameleon 3 Locking cog / disk
This will only fit the 3rd generation of the bugaboo, not the earlier models
this is for the Left part, Marked L
please note
you do need to file out the center a bits so that they fit, and you will also need to drill out the hole for the wire in the hub to fit using a 2 mm drill bit
The Right part is available seperatleywhy we only make plastic disks to fit the Cam 3
If the lugs that the locking pins sit on have broke, then there has been force put through the locking system for the lugs to snap.
Q, So what happens is you replace the plastic disk with a metal disk??
A, If excess force is placed through the locking system the disk will not snap but the force will go through the hub section and damage the cut outs the locking pins sit in.
This means the Cameleon 3 is beyond repair!!!
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: