Smooth Fine Detail Plastic
N Scale CGI/Classic Snowplough for Bachmann Thomas
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$10.60
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
THIS MODEL IS SPECIFICALLY SUITED FOR N Scale Bachmann Thomas, Percy, and James.
This model is of a Snowplough for N Scale Engines, based off of those seen on the T&F Show. This model specifically was made to be a replica of the ploughs seen in Seasons 13-present, used by the engines Thomas, Edward, Percy, Duck and more.
This model is designed to be slotted onto the buffers of your engine using the included ‘bufferbeam slotter’. In order to use this snowplough, you will need to measure the height of the bufferbeam of your model, and glue the bufferbeam slotter onto the plough at the same height, so that the plough sits high enough that is doesn’t hit the rails, yet low enough that it can clear them of ‘snow’. Also, if the supporting bits of the bufferbeam slotter which rest against the bufferbeam of your engine are too long or short, I suggest you either sand them down, or add some hot glue to the end to lengthen them. If this problem does come up, please contact me to let me know. All of this really isn’t difficult to do, and if you have any questions feel free to ask me to help you out by contacting me either through Shapeways, my email (elsbridgeproductions@gmail.com), my twitter (@ElsbridgeP), my Instagram (@elsbridgeproductions), or my YouTube (Elsbridge Productions).
Please note the plough seen in the photos was a test print, the final model has been shrunken slightly and the bufferbeam slotter has been improved. The test print is also unpainted.
If you would like some help with the snowploughs or any of my other models, please contact me (details above) and I will help you out!
Dry Rails, Smooth Running and Happy Shopping!
This model is of a Snowplough for N Scale Engines, based off of those seen on the T&F Show. This model specifically was made to be a replica of the ploughs seen in Seasons 13-present, used by the engines Thomas, Edward, Percy, Duck and more.
This model is designed to be slotted onto the buffers of your engine using the included ‘bufferbeam slotter’. In order to use this snowplough, you will need to measure the height of the bufferbeam of your model, and glue the bufferbeam slotter onto the plough at the same height, so that the plough sits high enough that is doesn’t hit the rails, yet low enough that it can clear them of ‘snow’. Also, if the supporting bits of the bufferbeam slotter which rest against the bufferbeam of your engine are too long or short, I suggest you either sand them down, or add some hot glue to the end to lengthen them. If this problem does come up, please contact me to let me know. All of this really isn’t difficult to do, and if you have any questions feel free to ask me to help you out by contacting me either through Shapeways, my email (elsbridgeproductions@gmail.com), my twitter (@ElsbridgeP), my Instagram (@elsbridgeproductions), or my YouTube (Elsbridge Productions).
Please note the plough seen in the photos was a test print, the final model has been shrunken slightly and the bufferbeam slotter has been improved. The test print is also unpainted.
If you would like some help with the snowploughs or any of my other models, please contact me (details above) and I will help you out!
Dry Rails, Smooth Running and Happy Shopping!
Details
What's in the box:
N scale CGI classic Snowplough Thomas
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
