Black Natural Versatile Plastic
LSS DT Version 2.0 - Planetary Gear Set
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$81.45
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
LSS DT Version 2.0 is designed to fit:
2019/2020 Specialized Turbo Levo Expert (with DT Swiss rear hub)
2019/2020 Specialized Turbo Levo S-Works (with DT Swiss rear hub)
NEW! - Fits the 2019 YT Decoy. Make sure your build has a DT Switss rear hub and the SRAM Centerline 200 rotors.
For installation instructions and video see here:
https://jd3dlss.wordpress.com/2019/02/16/lss-installation-instructions/
Notes: This is a DIY Kit, assembly required. Buyer assumes all responsibility. May void your warranty. Do so at your own risk. Please follow all local laws.
Must be running stock rear wheel and rotor. You will need a 10mm x 3mm Neodymium cylindrical magnet. Version 2.0 improves the clearance between the parts and the frame. Also improves the cover seal. This version of the LSS (DT Version) has an inner diameter of 18.7mm for the sun gear and cover. Those are the parts that mount to the rear hub axle. Due to the design of the parts, they should allow mounting on axles up to around 19mm outer diameter.
2019/2020 Specialized Turbo Levo Expert (with DT Swiss rear hub)
2019/2020 Specialized Turbo Levo S-Works (with DT Swiss rear hub)
NEW! - Fits the 2019 YT Decoy. Make sure your build has a DT Switss rear hub and the SRAM Centerline 200 rotors.
For installation instructions and video see here:
https://jd3dlss.wordpress.com/2019/02/16/lss-installation-instructions/
Notes: This is a DIY Kit, assembly required. Buyer assumes all responsibility. May void your warranty. Do so at your own risk. Please follow all local laws.
Must be running stock rear wheel and rotor. You will need a 10mm x 3mm Neodymium cylindrical magnet. Version 2.0 improves the clearance between the parts and the frame. Also improves the cover seal. This version of the LSS (DT Version) has an inner diameter of 18.7mm for the sun gear and cover. Those are the parts that mount to the rear hub axle. Due to the design of the parts, they should allow mounting on axles up to around 19mm outer diameter.
Tags
BicyclesDetails
What's in the box:
LSS_DT_Gear Assembly_V2_Shapeways_Low_Profile
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
