Click and drag to rotate
LSS DT Version 2.0 - Planetary Gear Set 3d printed

Not a Photo

Black Natural Versatile Plastic
LSS DT Version 2.0 - Planetary Gear Set 3d printed
LSS DT Version 2.0 - Planetary Gear Set 3d printed

Not a Photo

LSS DT Version 2.0 - Planetary Gear Set

Made by
Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
LSS DT Version 2.0 is designed to fit:
2019/2020 Specialized Turbo Levo Expert (with DT Swiss rear hub)
2019/2020  Specialized Turbo Levo S-Works (with DT Swiss rear hub)

NEW! - Fits the 2019 YT Decoy. Make sure your build has a DT Switss rear hub and the SRAM Centerline 200 rotors. 

For installation instructions and video see here:

Notes: This is a DIY Kit, assembly required. Buyer assumes all responsibility. May void your warranty. Do so at your own risk. Please follow all local laws. 

Must be running stock rear wheel and rotor. You will need a 10mm x 3mm Neodymium cylindrical magnet. Version 2.0 improves the clearance between the parts and the frame. Also improves the cover seal.
  This version of the LSS (DT Version) has an inner diameter of 18.7mm for the sun gear and cover. Those are the parts that mount to the rear hub axle. Due to the design of the parts, they should allow mounting on axles up to around 19mm outer diameter. 
What's in the box:
LSS_DT_Gear Assembly_V2_Shapeways_Low_Profile
6.6 x 6.6 x 1.09 cm
Switch to inches
2.6 x 2.6 x 0.43 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.