Gray PA12
Retribution Acolyte Chassis (Angled Proffie)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$37.55
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is the acolyte chassis for the Shadowfoil Props/Phoenix Props Retribution. Chassis is a single half design, so if you're installing the full staff you should purchase two of them.
The proffie is angled at 20 degrees, so you will need the following define in your config to use gesture controls
#define ORIENTATION_ROTATION 0,20,0
Parts List
The proffie is angled at 20 degrees, so you will need the following define in your config to use gesture controls
#define ORIENTATION_ROTATION 0,20,0
Parts List
- Proffie v2.2/v3
- 18650 Protected Button Top Battery
- KR 25mm Veco Bass Speaker
- 2x 1.5mm Brass Tactile Switches
- 1x 17.5mm Short Pin Pixel Connector (Shtok, CC, etc)
- 1010-1 and 1016-1 Keystone Battery Contacts
- 2x 2020 pixel strips (the micro ones, 3.5mm wide) or 2x LED Filaments
- 3A Kill Switch
Details
What's in the box:
Reva_Chassis_20deg
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
