Click and drag to rotate
Glacier Peak, Washington, USA, 1:250000 Explorer 3d printed

Not a Photo

Glacier Peak, Washington, USA, 1:250000 Explorer 3d printed
Glacier Peak, Washington, USA, 1:250000 Explorer 3d printed

Not a Photo

Glacier Peak, Washington, USA, 1:250000 Explorer 3d printed
Glacier Peak, Washington, USA, 1:250000 Explorer 3d printed

Not a Photo

Glacier Peak, Washington, USA, 1:250000 Explorer

Made by
Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Why did I want to climb Glacier Peak? Aside from its obvious beauty is the fact that this mountain has always had an air of mystery to me. Unlike its other Northwest counterparts such as Mount Rainier, Baker etc., Glacier Peak cannot be easily accessed by paved roads. You can't just jump in your car and make a day trip out of it. It takes at least 15 miles of hard hiking just to approach this mountain, which is the centerpiece of a wilderness area roughly the size of Rhode Island, so a multi-day trip is going to be the minimum to be able to experience it. I had been reading about Glacier Peak all my life in hiking guidebooks and whatever I could get my hands on, and while I have climbed other volcanoes up and down the Cascade Range, I had yet to attempt this one. Now just felt like the right time to do it.

The other facet of Glacier Peak that attracted me in a big way is that scientists consider it the most explosive of the Cascade Range volcanoes after Mount St. Helens. Because of its remoteness, Glacier Peak has the least amount of monitoring equipment and is still a big mystery to geologists whose job is to study it for potential future eruptions. It is known that Glacier Peak had five successive and very violent eruptions around 13,000 years ago which spread volcanic ash as far away as Alberta, Canada. Smaller outbursts went on over the millennia until the early to mid-1700s, so Glacier Peak has been dormant for only 300 years. Whether it stays that way remains to be seen.

I hope that helps you understand my attraction to this magnificent Northwest volcano and why I'm looking forward to commemorating my inaugural climb of it with this TinyMtn model.

Text by D. Stockton

The Explorer series of TinyMtn models is designed to break our usual impression of mountains. We generally see mountains one at a time, from a distance, and from the ground. While all TinyMtn models give you a fresh perspective on any one peak, the Explorer series presents mountains in identical scale, and shifted up so that sea level is at the bottom of the base. Thus, when you set two Explorer models next to each other, you will immediately notice which is taller, which rises more from its base, which is more massive, and so on. Plus, all Explorer models come in full color, making them just that much more realistic.

Model scale is 1:250000
Model covers an area approximately 3.7 by 3.7 miles
Altitudes covered: 4380' to 10525'
There is no vertical exaggeration applied to this model. This is a true-to-life scale model of a real place.

Click here for more sizes.
Click here for other 1:250000 models in the Explorer series.

TinyMtn models are most affordable in the "Sandstone" and "White Strong and Flexible" materials. This model is in "Sandstone," which is a glued gypsum material. When you receive the model it will be ready for display, though it may smell funny and need some time to air out. "Sandstone" models are much more brittle than "White Strong and Flexible" models, but feel more like light stone. Do not soak it in water, though you can safely seal it with Polycrylic or a similar water-based clear spray sealant. Read more about this popular material here.

These models have been optimized for the above materials, and are not offered in other materials for strength or cost reasons. If you need one in another material, please and we'll do our best to fulfill your request.

(C) 2016 TinyMtn (TM)
Model created using GDAL, NetPBM, Gmsh, Carve, MeshLab, and other custom software
Source of digital elevation and aerial orthoimagery data: U.S. Geological Survey
The USGS home page is
What's in the box:
Glacier Peak, WA, USA, 1:250000 Explorer
2.4 x 2.4 x 1.28 cm
Switch to inches
0.95 x 0.95 x 0.51 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.