3d render showing product detail
1/285 (6mm) US XM800T LAW Light Tank x2
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$17.72
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/285 (6mm) Scale Modern US XM800T LAW Light Tank.
Contains 2 highly detailed tanks.
Contains:
XM800T LAW Light Tank
The XM800T was developed by the United States in the 1970s as an experimental scout vehicle. Designed with the intention of replacing the primary armored personnel carriers at the time, the M113 and M114, the project produced two very different prototypes, though both had the same turret and weaponry. Despite the fact that the XM800T never entered active service, it had some influence on the M2 Bradley program down the road.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Contains 2 highly detailed tanks.
Contains:
- 2x XM800T LAW Light Tanks
XM800T LAW Light Tank
The XM800T was developed by the United States in the 1970s as an experimental scout vehicle. Designed with the intention of replacing the primary armored personnel carriers at the time, the M113 and M114, the project produced two very different prototypes, though both had the same turret and weaponry. Despite the fact that the XM800T never entered active service, it had some influence on the M2 Bradley program down the road.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Details
What's in the box:
285 XM800T LAW X2.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
