Gray PA12 Glass Beads
Montgomery 15, PG966A 179mm sleeve
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$69.72
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Made for Dwyer Mast DM-4 with feed slot cut length of 179mm (approx 7 1/16")
The material is a glass-filled nylon. Choice of Gray or Drak Gray.
The slide-on MastGate sleeve is held in place with a nylon removable trim pin found in automotive stores, or ordered
NOTE: To tether the gate plate to the mast, I added a 1/8" tube for feeding a 3/32" shock cord or string through. The center notchout is a location to have a cord knot. By having a knot, if one cord end breaks, you will have the other half cord holding the gate.
Help: TomLuQue@gmail.com
Ver: Monty 15 DM4 B2 179mm PG966A 1/12/24
The material is a glass-filled nylon. Choice of Gray or Drak Gray.
The slide-on MastGate sleeve is held in place with a nylon removable trim pin found in automotive stores, or ordered
NOTE: To tether the gate plate to the mast, I added a 1/8" tube for feeding a 3/32" shock cord or string through. The center notchout is a location to have a cord knot. By having a knot, if one cord end breaks, you will have the other half cord holding the gate.
Help: TomLuQue@gmail.com
Ver: Monty 15 DM4 B2 179mm PG966A 1/12/24
Details
What's in the box:
Monty 15 DM4 B2 PG966A
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
