Aluminum
Cupra Flag Grill/Boot Replacement - Outline
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$58.71
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Introduce a unique touch to your Cupra
-
Designed to fit in the footprint of the original Cupra grill flag, both front and back. What's unique about this is that the flag recesses are removed so your paint colour will show through for a colour matched look, something not yet done. You could also place coloured vinyl behind for various colour options.
The OEM badges are held on with tape, so please don't get worried about using tape. I used Gorilla tape from Halfords which so far has worked well!
This particular version has a 1mm lip around the back face to allow for adhesive tape to be applied while remaining flush with the grill. You MAY need to sand the lip back if needed to allow for thinner tape. Be sure the tape has good contact with the car before driving.
-
The edges are drafted slightly, and the front edge is rounded off with 0.5mm fillet to give it that genuine look.
This can also be placed around other areas of the car such as the dash or on the back of the seats/headrests/exterior trim.
-
Designed to fit in the footprint of the original Cupra grill flag, both front and back. What's unique about this is that the flag recesses are removed so your paint colour will show through for a colour matched look, something not yet done. You could also place coloured vinyl behind for various colour options.
The OEM badges are held on with tape, so please don't get worried about using tape. I used Gorilla tape from Halfords which so far has worked well!
This particular version has a 1mm lip around the back face to allow for adhesive tape to be applied while remaining flush with the grill. You MAY need to sand the lip back if needed to allow for thinner tape. Be sure the tape has good contact with the car before driving.
-
The edges are drafted slightly, and the front edge is rounded off with 0.5mm fillet to give it that genuine look.
This can also be placed around other areas of the car such as the dash or on the back of the seats/headrests/exterior trim.
Details
What's in the box:
Cupra Flag Outline
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
